Last modified: February, 2006
The Dimmer/Flasher for Flashlights
FL-CTL1C/FL-CTL1D
■Outline
Only by putting FL-CTL1C/D into the
flashlight, five lighting control can be performed by
switch
operation of a flashlight.
It becomes the ordinary lighting when a
switch is turned on first.
If a switch is turned off and a switch
is turned on within 3 seconds, it will change to
the
next lighting control. That is, a lighting control changes in order of dimmer
1, dimmer 2,
flasher
1, flasher 2, and ordinary lighting.
If a switch is turned off and a switch
is turned on after 3 seconds pass, it will return to
ordinary
lighting.
For incandescent bulb only.
■Specifications
Supply voltage : 2.5～10V
(2 ～ 6 batteries)
FL-CTL1C
for "C" batteries, FL-CTL1D for "D" batteries
Lighting control current : 2A max
Lighting control
: Ordinary lighting (percentage of lighting current 99%)
Dimmer 1
(percentage of lighting current 70%)
Dimmer 2
(percentage of lighting current 40%)
Flasher 1 (lighting 0.5sec.
/ no-lighting 0.5sec.)
Flasher 2 (lighting 1sec. / no-lighting 2sec.)
Operating temperature : 0～70℃
Size
: FL-CTL1C 25mm
diameter × 3.5mm thickness
1" diameter ×
1/8" thickness
FL-CTL1D 32mm
diameter × 4.5mm thickness
1-1/4" diameter × 3/16" thickness
Weight
: FL-CTL1C 3.5g, 0.123oz
FL-CTL1D 5.5g, 0.194oz
The Dimmer for
Flashlights
FL-CTL2D
■Outline
Only by putting FL-CTL2D into the
flashlight, lighting control can be performed by switch
operation
of a flashlight.
It becomes the ordinary lighting when a
switch is turned on first. If a switch is turned off
and a
switch is turned on within 3 seconds, the brightness of a flashlight will
change.
If it
becomes the brightness to wish, and a switch will be turned off and a switch
will be
turned
on within 3 seconds, a flashlight will be turned on with brightness just before
turning
off a switch.
If a switch is turned off and a switch
is turned on after 3 seconds pass, it will return to
ordinary
lighting.
For incandescent bulb only.
■Specifications
Supply voltage : 2.5～10V
(2 "D" ～ 6 "D" batteries)
Lighting control current : 2A max
Lighting control
: Ordinary lighting (percentage of lighting current 99%)
Dimmer (percentage
of lighting current 99～40%)
Operating temperature : 0～70℃
Size
: 32mm diameter ×
4.5mm thickness
1-1/4" diameter × 3/16" thickness
Weight
: 5.5g
0.194oz
The
Dimmer/Flasher for Flashlights
FL-CTL3C/FL-CTL3D
■Outline
Only by putting FL-CTL3C/D into the
flashlight, five lighting control can be performed by
switch
operation of a flashlight.
It becomes the ordinary lighting when a
switch is turned on first.
Lighting control is performed by the following method.
First, On/Off of a switch are repeated twice within 3 seconds. Next, if
a switch is turned on
within 3 seconds, it will change to dimmer 1.
Then, it is the switch change for within 3 seconds, and
changes to the next lighting control.
That
is, a lighting control changes in order of dimmer 2, flasher 1, flasher 2,
ordinary
lighting,
and dimmer 1.
If a switch is turned off and a switch
is turned on after 3 seconds pass, it will return to
ordinary
lighting.
For incandescent bulb only.
■Specifications
Supply voltage : 2.5～10V
(2 ～ 6 batteries)
FL-CTL3C for "C" batteries, FL-CTL3D for "D"
batteries
Lighting control current : 2A max
Lighting control
: Ordinary lighting (percentage of lighting current 99%)
Dimmer
1
(percentage of lighting current 70%)
Dimmer 2
(percentage of lighting current 40%)
Flasher 1 (lighting 0.5sec.
/ no-lighting 0.5sec.)
Flasher
2
(lighting 1sec. /
no-lighting 2sec.)
Operating temperature : 0～70℃
Size
: FL-CTL3C 25mm
diameter × 3.5mm thickness
1" diameter ×
1/8" thickness
FL-CTL3D 32mm
diameter × 4.5mm thickness
1-1/4" diameter × 3/16" thickness
Weight
: FL-CTL3C 3.5g, 0.123oz
FL-CTL3D 5.5g, 0.194oz
The Short
Circuit Detector
for Model Rocket Launch Controllers
SD-1/SD-2
■Outline
The short circuit detector SD-1/SD-2 detects the
short circuit of mutual micro-clips or
short circuit of mutual lead wires of igniter, and informs
the error of lighting of LED.
Before the model rocket is launched, short
circuit can be detected, and it is possible
to prevent the misfire.
SD-2 detects the decrease in voltage of battery
by flashing of LED with detecting
function for the reduced voltage.
SD-1/SD-2 is equipped in the launch controller
by Estes, MRC and Quest.
■Specifications
Supply voltage
: 4～7V
Current consumption : at
no-lighting of LED
2mA max
at lighting of LED
18mA max
standby time
0.01μA max
(no-lighting of continuity light)
Detection resistance : 2.5Ω max
Reduced voltage detection : 5.5V typ (SD-2 only)
Size
: 10 × 18 × 5mm
13/32 × 23/32 × 3/16”
Weight(except for weight of lead wires) : 1.5g
0.053oz
